Single Arm Monday Stand Basic for 1098 Ducati / MV Augusta (Pin 40,7 mm)

This product is currently not available.
€73.99 *

Prices incl. VAT plus shipping costs

Ready to ship today, Delivery time appr. 3-5 workdays

  • MX016S1003
  • Side stand left
    Firmly welded
    Extremely stable
    Easy to jack up
Product information "Single Arm Monday Stand Basic for 1098 Ducati / MV Augusta (Pin 40,7 mm)"

The assembly stand for your single-sided swingarm, side stand left, with 40.7 mm pin for Ducati 1098 / MV Augusta
Most assembly stands are not suitable for single-sided swingarms - but not with us: we present you our single-sided swingarm stand with custom-fit pin for your motorbike with a mono-sided swingarm.

Your advantages:

  • With matching mounting pin for your Ducati 1098 / MV Augusta with 40.7 mm
  • Firmly welded and therefore very stable
  • Large tube diameter (45 mm) for very stable stand
  • Easy and fast jacking up of your motorbike with single-sided swing arm
  • Extremely sturdy design
  • Double rollers
  • Ball bearing bolts - so you can turn your rear wheel when jacked up
  • High-quality workmanship made of powder-coated tubular steel
  • Side stand, left

Why do I need a single-arm swingarm stand?
If you spend a lot of time with your motorbike, you can't do without an assembly stand. They are very practical for many jobs and activities around the motorbike:

  • Easy bolting, as the tyres are so free in the air.
  • Safe stand, whether at home or on the race track
  • Easy transport - you can securely lash your motorbike to the assembly stand
  • Winter storage with the bike jacked up - to avoid damage to the bike during storage

Assembly stands are often not designed for single-sided swingarms - but that's over now! With the dismountable assembly stand for single-sided swingarms, you can jack up your motorbike in no time at all.

Wondering how the stand for single-sided swingarms works?
You slide the stand onto your bike and insert the pin into your swingarm. With a lever movement (you push the stand downwards) you can then easily jack up your bike without much force.
Practical feature: the ball-bearing bolts make it easy to turn your rear wheel to carry out work.

Technical data:

  • Standard load: 200 kg
  • Tube diameter: 45 mm
  • Colour: black
  • Side stand, left
  • Made of powder-coated tubular steel
  • Ball bearing bolts
  • Height: 400 mm
  • Width: 465 mm - 560 mm
  • support pin: 12,5 cm
  • Support height: 40 cm

Scope of delivery:

  • Premium single-sided swingarm stand
  • Pin 40.7 mm suitable for Ducati / MV Augusta motorbikes

Frequently asked questions about the single-sided swingarm stand
Question: Do I need a new stand if I buy another motorbike?
Answer: No you don't! Only the pin is model specific and can be easily replaced. If you buy a new motorbike you may need a new pin. Just contact us and we will find the right pin for you:

Question: Are there any reasons why the single-sided swingarm stand may not fit?
Answer: This can happen - the pins were developed for motorbikes in their original condition. This means that changes to the brake system, for example, may mean that the pin does not fit. But in this case, just contact us and we can look for a suitable pin together:




Write review
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

Similar products

Tire Changer EVO2 12"-21"
Tire Changer EVO2 12"-21"
€280.00 *
Motorcycle wheel chock 16-21"
Motorcycle wheel chock 16-21"
€59.99 *
Passend dazu
Tire Changer EVO2 12"-21"
Tire Changer EVO2 12"-21"
€280.00 *
Motorcycle wheel chock 16-21"
Motorcycle wheel chock 16-21"
€59.99 *

Customers also bought

Adapter Ducati / Triumph
Adapter Ducati / Triumph
€65.00 *
Valve Cap Tool
Valve Cap Tool
€1.00 *
Tyre chalk / grease chalk
Tyre chalk / grease chalk
€1.50 *
Valve Mounting Tool Standard
Valve Mounting Tool Standard
€6.50 *
Balancer Shaft
Balancer Shaft
€25.00 *